3D DIY Ribbon Embroidery Bag Set

Product parameters:

Item Type:Embroidery Kit

Packing list:: 1 set ( Fabric tape * 1, thread * 1, designs * 1, needle * 1)

Material: cotton and linen
Size: 21×16.5x4cm

Color:Multicolor

Ribbon Embroidery Bag Set,Unfinished,Needs sewing by yourself

Note：

Please allow1-2cm measuring deviation due to manual measurement.

Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you

Straight needle embroidery:

1. knot the thread and pass it out from the bottom,

2. Lower the needle in front of the first needle position.

3. Embroider a straight needle embroidery needle.

4. then eject the needle from the place beside the first needle.

5. again, penetrate the bottom of the needle next to the second needle.

6. Repeat the above actions until the entire screen is filled.

7. All embroidery is completed in the same way.

embroidered outline:

1. the needle is threaded out of the base cloth,
2. Lower the needle to the 1 cm position as shown in the figure and then pass between the two needles.
3. repeat the above actions,
4. Finish.

embroidery needle french beans:

1. the needle is threaded out of the base cloth,
2-3. Wrap the ribbon needle around once. Squeeze it and go through the bottom
4. Finish.

Straight needle embroidery:

1. the needle is threaded out of the base cloth,
2. straight needle pass.
4. Finish.

Straight Needle Embroidery Sheet:

1. the needle is threaded out of the base cloth,
2. cross the tape surface.
4. Finish.